top of page
Exponent Edge The Infinity Arm 2.0
The Most Versatile Piece of Home Gym Equipment
 
Patent-pending, rack-attaching, Infinity Arm can be utilized for chest-supported, arm-supported, back-supported, head-supported, and many other supported exercises. It fits 3" x 3" Racks and 2” x 3” Racks (will only attach on the 3 inch side).
 
Space Saving
With home gyms in mind, this also folds down to take up less room or is easily removed to allow you to perform your favorite rack exercises.
 
For Any Equipment
There is no limit to what weight options can be used; dumbbells, kettlebells, barbell movements, EdgeBar movements, and whatever else you got.
 
Multiple Adjustment Angles
Multiple adjustment angles: Flip and attach in the opposite direction:
  • 3 Bracket Arm Positions: Top, Middle & Bottom
  • 8 Adjustable Arm positions
  • 18 Support Pad Positions
 
With home gyms in mind, this also folds down to take up less room or is easily removed to allow you to perform your favorite rack exercises.

Exponent Edge The Infinity Arm 2.0

319,00$Preis
exkl. MwSt.

***The pins will be black versus red.***

  • Rack Attachment: 8 x 3-7/8 x 8
  • For 5/8" and 1" squat rack hole diameter size
  • Fits 3" x 3" Racks and 2” x 3” Racks (will only attach on the 3 inch side)
  • The Chest Support Attachment is 25" long (end of the pad to end of arm attachment)
  • The distance of arm from the rack to the end of the pad is 29 inches
  • The Support Pad is 12 x 9 x 3 (in the center)
  • Weight -  29 lbs
  • Weight Capacity - 600lbs / 270kg
  • See all the attachment options above
  • The Support Pad will be black as well as the entire unit will be Matte Black. One unit pictured was custom painted for my home gym.
  • Comes with (4) Custom, Black logo'd, Magnetic Pins
  • You will also receive 2 Screws for front hole attachment, if you are using front holes only and more of a semi-permanent attachment.

The Infinity Arm has multiple adjustment angles, can be flipped and attached in the opposite direction, and also features a support pad that can move into several positions to perfectly fit your body’s build and accommodate a wide array of exercises using multiple angles. 

  1. There are 3 Bracket Arm Pivoting Positions: Top, Middle & Bottom
  2. There are 8 Adjustable Arm positions
  3. There are 18 Support Pad Positions

 

This device is built to be tight to your rack. On first install, the device will grip tightly and will attach easier over time.

  1. You can attach it coming out to the side of your rack using the front of the post holes with the 5/8-inch or 1-inch versions.
  2. You can attach it to the inside of the rack as this device has top and bottom holes that are 6-inch on-center holes, standard for most racks. 
  3. Finally, you can attach this while facing your rack using the interior holes.

*Some Mounting tips & recommendations, if using front holes only, you should use at least one of the screws that come with the device. You can then use another magnetic pin on the from the front or forth side. This device comes with two screws for this reason and they are screws versus quick pins or R-Clips as each allow some slight movement (used by some others) and the screw provides the most secure solution.

 

If you want to perform isolation Curls using 15 different angles, no problem. If you want to perform exercises with a more vertical angle, you can do that too. Just pull the pin and move the support pad forward or backward to get the ideal angle for your lift. 

 

This space-saving design includes a Black Steel finish, a Black Support Pad (red is pictured here), UHMW to protect your rack, and 4 Hitch Pins.  

 

The Arm attaches to the rack with up to 12 different angles & the Support Pad can be adjusted from 18 different angles. The options are endless!

 

Fits 3" x 3" Racks and 2” x 3” Racks (will only attach on the 3 inch side)

bottom of page